⚝
One Hat Cyber Team
⚝
Your IP:
216.73.216.177
Server IP:
50.6.168.112
Server:
Linux server-617809.webnetzimbabwe.com 5.14.0-570.25.1.el9_6.x86_64 #1 SMP PREEMPT_DYNAMIC Wed Jul 9 04:57:09 EDT 2025 x86_64
Server Software:
Apache
PHP Version:
8.4.10
Buat File
|
Buat Folder
Eksekusi
Dir :
~
/
usr
/
libexec
/
iptables
/
View File Name :
iptables.init
#!/usr/bin/bash # # iptables Start iptables firewall # # chkconfig: 2345 08 92 # description: Starts, stops and saves iptables firewall # # config: /etc/sysconfig/iptables # config: /etc/sysconfig/iptables-config # ### BEGIN INIT INFO # Provides: iptables # Required-Start: # Required-Stop: # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: start and stop iptables firewall # Description: Start, stop and save iptables firewall ### END INIT INFO # compat for removed initscripts dependency success() { echo -n "[ OK ]" return 0 } warning() { echo -n "[WARNING]" return 1 } failure() { echo -n "[FAILED]" return 1 } IPTABLES=iptables IPTABLES_DATA=/etc/sysconfig/$IPTABLES IPTABLES_FALLBACK_DATA=${IPTABLES_DATA}.fallback IPTABLES_CONFIG=/etc/sysconfig/${IPTABLES}-config IPV=${IPTABLES%tables} # ip for ipv4 | ip6 for ipv6 [ "$IPV" = "ip" ] && _IPV="ipv4" || _IPV="ipv6" PROC_IPTABLES_NAMES=/proc/net/${IPV}_tables_names VAR_SUBSYS_IPTABLES=/var/lock/subsys/$IPTABLES # only usable for root if [ $EUID != 0 ]; then echo -n $"${IPTABLES}: Only usable by root."; warning; echo exit 4 fi if [ ! -x /sbin/$IPTABLES ]; then echo -n $"${IPTABLES}: /sbin/$IPTABLES does not exist."; warning; echo exit 5 fi # Default firewall configuration: IPTABLES_MODULES="" IPTABLES_SAVE_ON_STOP="no" IPTABLES_SAVE_ON_RESTART="no" IPTABLES_SAVE_COUNTER="no" IPTABLES_STATUS_NUMERIC="yes" IPTABLES_STATUS_VERBOSE="no" IPTABLES_STATUS_LINENUMBERS="yes" IPTABLES_SYSCTL_LOAD_LIST="" IPTABLES_RESTORE_WAIT=600 IPTABLES_RESTORE_WAIT_INTERVAL=1000000 # Load firewall configuration. [ -f "$IPTABLES_CONFIG" ] && . "$IPTABLES_CONFIG" is_iptables_nft() { iptables --version | grep -q '(nf_tables)' } netfilter_active() { is_iptables_nft && return 0 [ -e "$PROC_IPTABLES_NAMES" ] } netfilter_tables() { netfilter_active || return 1 is_iptables_nft && { # explicitly omit security table from this list as # it should be reserved for SELinux use echo "raw mangle filter nat" return 0 } cat "$PROC_IPTABLES_NAMES" 2>/dev/null } # Get active tables NF_TABLES=$(netfilter_tables) flush_n_delete() { # Flush firewall rules and delete chains. netfilter_active || return 0 # Check if firewall is configured (has tables) [ -z "$NF_TABLES" ] && return 1 echo -n $"${IPTABLES}: Flushing firewall rules: " ret=0 # For all tables for i in $NF_TABLES; do # Flush firewall rules. $IPTABLES -t $i -F; let ret+=$?; # Delete firewall chains. $IPTABLES -t $i -X; let ret+=$?; # Set counter to zero. $IPTABLES -t $i -Z; let ret+=$?; done [ $ret -eq 0 ] && success || failure echo return $ret } set_policy() { # Set policy for configured tables. policy=$1 # Check if iptable module is loaded netfilter_active || return 0 # Check if firewall is configured (has tables) tables=$(netfilter_tables) [ -z "$tables" ] && return 1 echo -n $"${IPTABLES}: Setting chains to policy $policy: " ret=0 for i in $tables; do echo -n "$i " case "$i" in raw) $IPTABLES -t raw -P PREROUTING $policy \ && $IPTABLES -t raw -P OUTPUT $policy \ || let ret+=1 ;; filter) $IPTABLES -t filter -P INPUT $policy \ && $IPTABLES -t filter -P OUTPUT $policy \ && $IPTABLES -t filter -P FORWARD $policy \ || let ret+=1 ;; nat) $IPTABLES -t nat -P PREROUTING $policy \ && $IPTABLES -t nat -P POSTROUTING $policy \ && $IPTABLES -t nat -P OUTPUT $policy \ || let ret+=1 ;; mangle) $IPTABLES -t mangle -P PREROUTING $policy \ && $IPTABLES -t mangle -P POSTROUTING $policy \ && $IPTABLES -t mangle -P INPUT $policy \ && $IPTABLES -t mangle -P OUTPUT $policy \ && $IPTABLES -t mangle -P FORWARD $policy \ || let ret+=1 ;; *) let ret+=1 ;; esac done [ $ret -eq 0 ] && success || failure echo return $ret } load_sysctl() { # load matched sysctl values if [ -n "$IPTABLES_SYSCTL_LOAD_LIST" ]; then echo -n $"Loading sysctl settings: " ret=0 for item in $IPTABLES_SYSCTL_LOAD_LIST; do fgrep -hs $item /etc/sysctl.d/*.conf | sysctl -p - >/dev/null let ret+=$?; done [ $ret -eq 0 ] && success || failure echo fi return $ret } start() { # Do not start if there is no config file. if [ ! -f "$IPTABLES_DATA" ]; then echo -n $"${IPTABLES}: No config file."; warning; echo return 6 fi # check if ipv6 module load is deactivated if [ "${_IPV}" = "ipv6" ] \ && grep -qIsE "^install[[:space:]]+${_IPV}[[:space:]]+/bin/(true|false)" /etc/modprobe.conf /etc/modprobe.d/* ; then echo $"${IPTABLES}: ${_IPV} is disabled." return 150 fi echo -n $"${IPTABLES}: Applying firewall rules: " OPT= [ "x$IPTABLES_SAVE_COUNTER" = "xyes" ] && OPT="-c" if [ $IPTABLES_RESTORE_WAIT -ne 0 ]; then OPT="${OPT} --wait ${IPTABLES_RESTORE_WAIT}" if [ $IPTABLES_RESTORE_WAIT_INTERVAL -lt 1000000 ]; then OPT="${OPT} --wait-interval ${IPTABLES_RESTORE_WAIT_INTERVAL}" fi fi $IPTABLES-restore $OPT $IPTABLES_DATA if [ $? -eq 0 ]; then success; echo else failure; echo; if [ -f "$IPTABLES_FALLBACK_DATA" ]; then echo -n $"${IPTABLES}: Applying firewall fallback rules: " $IPTABLES-restore $OPT $IPTABLES_FALLBACK_DATA if [ $? -eq 0 ]; then success; echo else failure; echo; return 1 fi else return 1 fi fi # Load additional modules (helpers) if [ -n "$IPTABLES_MODULES" ]; then echo -n $"${IPTABLES}: Loading additional modules: " ret=0 for mod in $IPTABLES_MODULES; do echo -n "$mod " modprobe $mod > /dev/null 2>&1 let ret+=$?; done [ $ret -eq 0 ] && success || failure echo fi # Load sysctl settings load_sysctl touch $VAR_SUBSYS_IPTABLES return $ret } stop() { # Do not stop if iptables module is not loaded. netfilter_active || return 0 # Set default chain policy to ACCEPT, in order to not break shutdown # on systems where the default policy is DROP and root device is # network-based (i.e.: iSCSI, NFS) set_policy ACCEPT # And then, flush the rules and delete chains flush_n_delete rm -f $VAR_SUBSYS_IPTABLES return $ret } save() { # Check if iptable module is loaded if ! netfilter_active; then echo -n $"${IPTABLES}: Nothing to save."; warning; echo return 0 fi # Check if firewall is configured (has tables) if [ -z "$NF_TABLES" ]; then echo -n $"${IPTABLES}: Nothing to save."; warning; echo return 6 fi echo -n $"${IPTABLES}: Saving firewall rules to $IPTABLES_DATA: " OPT= [ "x$IPTABLES_SAVE_COUNTER" = "xyes" ] && OPT="-c" ret=0 TMP_FILE=$(/bin/mktemp -q $IPTABLES_DATA.XXXXXX) \ && chmod 600 "$TMP_FILE" \ && $IPTABLES-save $OPT > $TMP_FILE 2>/dev/null \ && size=$(stat -c '%s' $TMP_FILE) && [ $size -gt 0 ] \ || ret=1 if [ $ret -eq 0 ]; then if [ -e $IPTABLES_DATA ]; then cp -f $IPTABLES_DATA $IPTABLES_DATA.save \ && chmod 600 $IPTABLES_DATA.save \ && restorecon $IPTABLES_DATA.save \ || ret=1 fi if [ $ret -eq 0 ]; then mv -f $TMP_FILE $IPTABLES_DATA \ && chmod 600 $IPTABLES_DATA \ && restorecon $IPTABLES_DATA \ || ret=1 fi fi rm -f $TMP_FILE [ $ret -eq 0 ] && success || failure echo return $ret } status() { if [ ! -f "$VAR_SUBSYS_IPTABLES" ]; then echo $"${IPTABLES}: Firewall is not running." return 3 fi # Do not print status if lockfile is missing and iptables modules are not # loaded. # Check if iptable modules are loaded if ! netfilter_active; then echo $"${IPTABLES}: Firewall modules are not loaded." return 3 fi # Check if firewall is configured (has tables) if [ -z "$NF_TABLES" ]; then echo $"${IPTABLES}: Firewall is not configured. " return 3 fi NUM= [ "x$IPTABLES_STATUS_NUMERIC" = "xyes" ] && NUM="-n" VERBOSE= [ "x$IPTABLES_STATUS_VERBOSE" = "xyes" ] && VERBOSE="--verbose" COUNT= [ "x$IPTABLES_STATUS_LINENUMBERS" = "xyes" ] && COUNT="--line-numbers" for table in $NF_TABLES; do echo $"Table: $table" $IPTABLES -t $table --list $NUM $VERBOSE $COUNT && echo done return 0 } reload() { # Do not reload if there is no config file. if [ ! -f "$IPTABLES_DATA" ]; then echo -n $"${IPTABLES}: No config file."; warning; echo return 6 fi # check if ipv6 module load is deactivated if [ "${_IPV}" = "ipv6" ] \ && grep -qIsE "^install[[:space:]]+${_IPV}[[:space:]]+/bin/(true|false)" /etc/modprobe.conf /etc/modprobe.d/* ; then echo $"${IPTABLES}: ${_IPV} is disabled." return 150 fi echo -n $"${IPTABLES}: Trying to reload firewall rules: " OPT= [ "x$IPTABLES_SAVE_COUNTER" = "xyes" ] && OPT="-c" if [ $IPTABLES_RESTORE_WAIT -ne 0 ]; then OPT="${OPT} --wait ${IPTABLES_RESTORE_WAIT}" if [ $IPTABLES_RESTORE_WAIT_INTERVAL -lt 1000000 ]; then OPT="${OPT} --wait-interval ${IPTABLES_RESTORE_WAIT_INTERVAL}" fi fi $IPTABLES-restore $OPT $IPTABLES_DATA if [ $? -eq 0 ]; then success; echo else failure; echo; echo "Firewall rules are not changed."; return 1 fi # Load additional modules (helpers) if [ -n "$IPTABLES_MODULES" ]; then echo -n $"${IPTABLES}: Loading additional modules: " ret=0 for mod in $IPTABLES_MODULES; do echo -n "$mod " modprobe $mod > /dev/null 2>&1 let ret+=$?; done [ $ret -eq 0 ] && success || failure echo fi # Load sysctl settings load_sysctl return $ret } restart() { [ "x$IPTABLES_SAVE_ON_RESTART" = "xyes" ] && save stop start } case "$1" in start) [ -f "$VAR_SUBSYS_IPTABLES" ] && exit 0 start RETVAL=$? ;; stop) [ "x$IPTABLES_SAVE_ON_STOP" = "xyes" ] && save stop RETVAL=$? ;; restart|force-reload) restart RETVAL=$? ;; reload) [ -e "$VAR_SUBSYS_IPTABLES" ] && reload RETVAL=$? ;; condrestart|try-restart) [ ! -e "$VAR_SUBSYS_IPTABLES" ] && exit 0 restart RETVAL=$? ;; status) status RETVAL=$? ;; panic) set_policy DROP RETVAL=$? ;; save) save RETVAL=$? ;; *) echo $"Usage: ${IPTABLES} {start|stop|reload|restart|condrestart|status|panic|save}" RETVAL=2 ;; esac exit $RETVAL